Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

COUNTRYMAN JCW introduce

MINI has officially announced the guide prices for the entire lineup of the all-new MINIJOHN COOPER WORKS. The new car offers a total of 6 models in 3 series, with a price range of 35500-456000 yuan. The specific prices of each model are shown in the table below: the new car has a more aggressive appearance compared to the old model, with outstanding LED headlights as standard. The JCW logo on the side of the car also constantly reminds that this is not an ordinary MINI model. In terms of the rear of the car, Its dual sided layout is the same as the MINI COUNTRYMAN COOPER S. The new car is built on the latest UKL1 platform, and there is also the MINI CLUBMAN on the same platform. The body size of the new car has been improved compared to the old model. The black interior is still full of MINI style, paired with red stitching and sports seats with a strong fighting atmosphere. The 6.5-inch multifunctional screen is standard across the entire series, and if you find it too small, you can also choose to install an 8.8-inch large-sized screen. In terms of power, It is equipped with a 2.0T turbocharged engine, with a maximum power of 170kW and a maximum torque of 350Nm. In terms of transmission, it adopts a 6MT or 8AT gearbox, and the driving form adopts front four-wheel drive