Front door interior panel introduce

The part names of the interior panel of the left front door, from top to bottom, are: left front door glass, left front mirror, left front glass sealing strip, those with decorative strips on the outside are called left front door decorative strip. The left front door is decomposed into left front door, mirror, glass, door lock, door glass controller, door glass elevator, mirror controller, left front door interior panel, handle, etc. The car is structurally divided into frame, outer panel, chassis, engine, interior, glass, tire, and is functionally divided into electrical system and driving system Driving system, oil and gas system, filtration system, control system, cooling system)

Installation method of front door interior panel/rear door interior panel

1、 Prepare tools and work vehicles or workbenches. 2. Open the car door to its maximum size for easier operation of the hinge support. Place a bracket at the lower edge of the car door to support the weight of the door and protect it. Unscrew the window glass. In this example, the disassembly of the car door will be mainly introduced. If the car door needs to be disassembled before disassembly, the outdoor rearview mirror should be removed. 3. Disconnect the wire connector between the car door and the vehicle body to separate the door wiring harness, If necessary, first remove the inner decorative parts on the pillar. 4. Remove the clamp at the bottom of the door stopper locking pin and extract the locking pin from the hole. 5. Hold the door and remove the connecting bolt of the door hinge support. After removing the door, place it vertically on a padded surface. If only the door needs to be removed for maintenance, it is recommended to complete the disassembly of the door by removing the hinge connecting bolt instead of the fixed bolt, This can reduce the adjustment work of the car door. 6. Check the sleeve of the car door chain, replace it if necessary, lubricate the hinge joint, place the car door back on the hinge support, and reinstall the bolts. 7. Connect the door limiter, install the stop lock pin and locking plate, and connect the electrical plug. 8. Close the car door, check if it is aligned, and if there is no problem, tighten the hinge fixing bolts. 9. Note that if the front door is disassembled and assembled, it is necessary to install the rearview mirror back

COUNTRYMAN JCW introduce

MINI has officially announced the guide prices for the entire lineup of the all-new MINIJOHN COOPER WORKS. The new car offers a total of 6 models in 3 series, with a price range of 35500-456000 yuan. The specific prices of each model are shown in the table below: the new car has a more aggressive appearance compared to the old model, with outstanding LED headlights as standard. The JCW logo on the side of the car also constantly reminds that this is not an ordinary MINI model. In terms of the rear of the car, Its dual sided layout is the same as the MINI COUNTRYMAN COOPER S. The new car is built on the latest UKL1 platform, and there is also the MINI CLUBMAN on the same platform. The body size of the new car has been improved compared to the old model. The black interior is still full of MINI style, paired with red stitching and sports seats with a strong fighting atmosphere. The 6.5-inch multifunctional screen is standard across the entire series, and if you find it too small, you can also choose to install an 8.8-inch large-sized screen. In terms of power, It is equipped with a 2.0T turbocharged engine, with a maximum power of 170kW and a maximum torque of 350Nm. In terms of transmission, it adopts a 6MT or 8AT gearbox, and the driving form adopts front four-wheel drive