tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

Great Wall Bigfoot Beast introduce

The Big Foot Monster, also known as the Great Wall CC1020ADY light-duty truck, is a newly developed off-road vehicle by Great Wall Motors The Big Foot Monster, also known as the Great Wall CC1020ADY light-duty truck, is a newly developed off-road vehicle by Great Wall Motors. It is divided into 4 categories × 4 and 4 × There are two types, with a total length, width, and height of 5.7 meters, 1.75 meters, and 1.95 meters respectively. The vehicle can carry more than 500 kilograms of cargo, with five passengers and a speed of over 120 kilometers per hour. It is matched with a 491QE multi-point electronic injection engine, with a displacement of 2.3 liters and 102 horsepower. The power is strong and meets Euro II standards, equipped with luxury equipment The biggest feature of the "Bigfoot Monster" is its large tires, high chassis, 230mm ground clearance, approach and departure angles reaching 45 ° and 30 ° respectively, and good passability. It has the comfort of a sedan and also has off-road performance that can adapt to complex road surfaces