LUK introduce

The clutch three piece set refers to the clutch friction plate, clutch pressure plate, clutch release bearing. The clutch pressure plate is the most important component in the clutch assembly, which directly determines whether the clutch is installed trembling, heavy, and used for a long time. The quality of the clutch friction plate will determine the overall service life and shock absorption and noise reduction effect of the clutch. The clutch release bearing is an important part of the clutch release system, Its quality determines the separation efficiency of the clutch system and the wear rate of the pressure plate separation)

Installation method of clutch three piece set

This advocates installation in car repair shops, as the installation method for each car is different: 1. Clutch pressure plate: it is a crucial structure on the clutch, and its function plays a crucial role in driving safety of the car; 2. The clutch is located in the flywheel housing between the engine and transmission. The clutch assembly is screwed onto the rear plane of the flywheel, and the output shaft of the clutch is the input shaft of the transmission. During the driving process of the car, the driver can press or release the clutch pedal as needed, temporarily separating the engine and transmission and gradually engaging them to cut off or transmit power input from the engine to the transmission; 3. The clutch is a common component in mechanical transmission that can be disengaged or engaged in the transmission system at any time. The general requirement is smooth engagement, rapid and thorough separation; Easy to adjust and maintain, with small external dimensions; Small weight, good wear resistance, and sufficient heat dissipation capacity; Convenient and labor-saving, commonly used methods include clamp type and friction type

Changfeng Cheetah CS7 introduce

CS7 is a masterpiece by the famous Italian design company Pininfarina The avant-garde version The "Classic" two types of cars are being launched simultaneously. The avant-garde version has a more avant-garde design, with a chrome trim on the grille and a large black grid design that occupies a large area of the front face, diluting the appearance of fog lights and highlighting the fashion sense of the front face. It is full of sportiness and is suitable for consumers around 20-40 years old. The "Classic" design is dignified, with integrated front headlights with eyebrows and a black bumper lower part, The design of the entire front of the car feels very full. The front grille is inverted trapezoidal, and the white highlight design makes the fog lights more prominent, and it contrasts with the front headlights up and down, enriching the elements of the front face and well reflecting the stable elements of the car model. It is suitable for people over 40 years old to use; At the same time, this car can also be used by the government