Control panel introduce

The air conditioning control panel is a panel where users indirectly control the air conditioning control mechanism to achieve various functions of the air conditioning. For example, the car air conditioning control panel has function selection keys, temperature keys, air adjustment keys, rear window defrosting keys, etc. The car air conditioning control method follows the control method of the air conditioning system, Car air conditioning can be divided into manual control, semi-automatic control, and fully automatic control. Various control modes of air conditioning use manual air conditioning control panels, semi-automatic air conditioning control panels, and fully automatic air conditioning control panels, respectively. Temperature regulation, air volume regulation, air flow distribution regulation: mainly including the following modes: defrosting of front and side windows; Front windshield, side windows, and passenger footsteps blowing; Passengers blowing in their footsteps; Blow air through the central and side vents. Adjust the internal and external air circulation, mainly including external and internal circulation. Automatic air conditioning control panel for defrosting the windshield after the air conditioning cooling is running/stopped)

Methods for disassembling automotive air conditioning panels

The disassembly method for the air conditioning panel is as follows: Step 1: First, remove the air conditioning control module. Step 2: Then use a rubber knife to loosen the cover plate above the center console. Step 3: Then remove the cover plate above the center console. Step 4: Then use a rubber knife to remove the air outlet at the center console. Step 5: Remove the air outlet, so that the entire center console panel is disassembled

Dongfeng Xiaokang K07 II introduce

The Dongfeng Xiaokang K07 II is a van under the Dongfeng brand. It has been adjusted at the front grille, and the layered lines on the side of the body are more prominent. Compared with the old model, the exterior design of the Dongfeng Xiaokang K07 II has been slightly modified. The front grille has been adjusted, and the layered lines on the side of the body are more prominent. In terms of size, its length has increased by 80mm, The height has been reduced by 40mm. This time, we are introducing the lowest configuration model of the entire series - the 1.0L practical model. The front and rear bumpers of the car are black, priced at 29800 yuan. In terms of space, when a 176cm tall tester sits in the car, the front headroom is two fists, and the rear legroom is also two fists. The headroom is more than two fists, and the slight headroom has never been a problem. In terms of the trunk, its minimum depth is 1110mm, Folding the rear seats can expand to 1940mm, but folding them requires the use of tools, which is somewhat inconvenient. Due to the limited size of the body, the performance of the trunk can only be described as average compared to the other three models