twc introduce

What is a three-way catalytic converter? A three-way catalytic converter is the most important external purification device installed in a car's exhaust system, which can remove CO from the car's exhaust Harmful gases such as HC and NOx are converted into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Simply put, they purify the exhaust gas. The working principle of a three-way catalytic converter is as follows: 1. When the engine exhaust gas is discharged through the exhaust pipe, due to the catalytic effect of the purifying agent in the three-way catalytic converter, the activity of C0, HC, and NOx is enhanced, leading to oxidation and reduction reactions. 2. C0 is oxidized to colorless and non-toxic C02 at high temperatures, HC compounds are oxidized to H20 and C02 at high temperatures, while NOx is reduced to N2 (nitrogen) and 02 (oxygen), thereby purifying the engine's exhaust emissions)

Method for installing a three-way catalytic converter

Method for installing a three-way catalytic converter: ① Use 8 bolts to install 2 heat shields on the new preheated three-way catalytic converter. ② Install the new gasket, protective ring, and sealing gasket onto the preheated three-way catalytic converter. ③ Use 3 bolts and 2 new nuts to install the preheated three-way catalytic converter with a tightening torque of 29N. m. ④ Use bolts and nuts to install the exhaust manifold bracket with a tightening torque of 42N. m. ⑤ Use bolts and nuts to install the No.1 exhaust manifold bracket with a tightening torque of 42N. m. ⑥ Connect the secondary oxygen sensor connector

BMW Z4 introduce

The basic structure of the Z4 suspension system comes from the BMW new 3 series, and some structural improvements have been made to make it more dynamic to operate than the previous suspension. The BMW Z4 is a focus coupe under the BMW brand, and its design is improved on the basis of the Z3. The long engine hood and very comfortable seats almost fall on the rear axle are very close to the back. The upward sloping tail of the new car is more attractive, coupled with clear concave and convex lines on both sides, Make the new car look more imposing than the Z3. These eye-catching lines are combined with first-class sports car performance: long wheelbase, short overhang, wide wheelbase, and a relatively low center of gravity