• Website for purchasing dismantled parts
  • 8:00-18:00
ZTE golden lion alternator

ZTE golden lion alternator

  • Price:please consult customer service
  • Transportation costs:Negotiate with sales personnel


alternator introduce

Generators are mechanical equipment that converts other forms of energy into electrical energy. They are driven by water turbines, steam turbines, diesel engines, or other power machinery, which convert the energy generated by water flow, airflow, fuel combustion or nuclear fission into mechanical energy and transmit it to the generator. The generator is then converted into electrical energy. Generators have a wide range of applications in industrial and agricultural production, national defense, technology, and daily life. There are many forms of generators, but their working principles are based on the laws of electromagnetic induction and electromagnetic force. Therefore, the general principle of their construction is to use appropriate magnetic and conductive materials to form magnetic circuits and circuits that conduct electromagnetic induction with each other, in order to generate electromagnetic power and achieve the purpose of energy conversion. Generators are usually composed of stators. The rotor is composed of rotor, generator (Figure 2) end cover, bearings, and other components. The stator is composed of stator core, wire wrapped winding, machine base, and other structural components that fix these parts. The rotor is composed of rotor core (or magnetic pole, magnetic choke) winding, protective ring, central ring, sliding ring, fan, and shaft. The stator and rotor of the generator are connected and assembled by bearings and end cover, allowing the rotor to rotate in the stator, The motion of cutting magnetic lines of force generates induced electromotive force, which is led out through wiring terminals and connected to the circuit to generate electric current. The diesel generator is driven by the diesel engine, and the generator (Figure 4) converts the energy of diesel into electrical energy. In the cylinder of the diesel engine, clean air filtered by the air filter is fully mixed with high-pressure atomized diesel injected by the fuel injector. Under the compression of the piston upward, the volume shrinks and the temperature rapidly increases, reaching the ignition point of diesel. Diesel is ignited, and the mixed gas burns violently. The volume rapidly expands, pushing the piston downward, which is called "work". The gasoline generator is driven by the gasoline engine, which converts the energy of gasoline into electrical energy. In the cylinder of the gasoline engine, the mixed gas burns violently, causing the combustion of the mixture. The volume rapidly expands, pushing the piston down to do work. Whether it is a diesel generator or a gasoline generator, each cylinder works in a certain order, and the thrust acting on the piston is converted into the force that drives the crankshaft to rotate through the connecting rod, thereby driving the crankshaft to rotate. By coaxially installing the brushless synchronous AC generator with the crankshaft of the power machine, the rotor of the generator can be driven by the rotation of the power machine, Using the principle of electromagnetic induction, the generator will output induced electromotive force, which can generate current through a closed load circuit)

Installation method of generator/generator assembly

Disassembly and assembly of automotive silicon rectifier generator 1. Inspection before disassembly (1) Clean the exterior of the generator; (2) Hand held pulley test for axial and radial clearance of bearings before testing; (3) Rotate the rotor and check for bearing resistance, noise, and any friction or abnormal noise between the rotor and stator. When significant resistance is found, remove the brush and try again to determine whether the resistance comes from the brush or the bearing; (4) Rotate the rotor shaft to visually inspect the runout of the pulley to determine if the rotor shaft is bent; (5) Check for cracks and damage in the casing, hanging feet, and other parts. 2. Disassemble the silicon rectifier generator. (1) Remove the rear bearing cover and oil seal, and unscrew the rotor shaft fastening nut; (2) Remove the fastening screws of the front and rear end covers to separate the front end cover with the rotor from the rear end cover with the stator, and make the same mark on the front and rear end covers and the stator core for easy reassembly; (3) Remove the fastening nut of the pulley, remove the pulley, fan, and half round key, separate the rotor from the front cover, and be careful not to pull the stator coil lead wire off; (4) Remove the front bearing cover and take out the front bearing; (5) Remove the protective cover from the rear cover; (6) Remove the connecting nut between the stator coil wire end and the neutral wire end on the component board, separate the stator from the component board (heat dissipation plate), and remove the stator assembly; (7) Remove the nuts securing the component board assembly and the armature terminal on the rear cover, and remove the component board assembly. 3. Assembly of the generator. (1) First, add No. 1-3 composite calcium based grease to the bearing, but the amount of grease filled in the bearing should not be too much to avoid overflow and splashing on the slip ring, causing poor contact of the electric brush; (2) Assemble the bearings of the front and rear end covers separately (201 # 203 #); (3) Install the rectifier component board onto the rear cover (do not miss the insulation pad); (4) Install the stator assembly onto the rear end cover and connect it to the rectifier component board (the four wiring terminals on the stator winding should be natural and not forcefully pulled or folded to avoid rotor scratches); (5) Install the rotor assembly onto the stator and rear end cover; (6) Combination connection of front and rear end covers (note that the nut of the connecting bolt is facing the fan, and the connecting bolt should be tightened diagonally. While tightening, rotate the rotor to check if it scratches the stator, so as to avoid burning the rotor and stator. If there is a phenomenon of rotor scraping the stator, use a wooden hammer to strike the generator casing for adjustment); (7) Assemble the half round key, fan, pulley, and rotor shaft front and rear fixing nuts; (8) Assemble the brush holder assembly (note that the position of the brush holder and the copper slip ring on the rotor shaft should be aligned, and one brush should not eat two slip rings, which will prevent power generation); (9) The assembled generator should rotate flexibly, without any jamming, scraping or collision sounds, and the rotor shaft should not have any movement

golden lion introduce

The 2WD and 4WD series of ZTE Golden Lion are matched with a 90KW Mitsubishi four cylinder electronic injection engine and a 127KW Daimler Chrysler six cylinder engine, respectively. The key components of the transmission, car, and suspension are directly imported from the United States and Japan. Especially the 4WD version of the time-sharing drive system allows drivers to choose the driving mode based on actual road conditions. When driving on general roads and highways, Economy (rear wheel drive) driving mode can be adopted, and four-wheel drive can be used when driving on harsh roads such as mountains, snow, and mud. Whether it is rough or smooth, the four-wheel drive version of the "ZTE Golden Lion" will help you move forward and create a four-wheel drive myth

Customer Reviews

  • 1.We will vary based on your shipping address and the chosen delivery method, and the general delivery time is 1-7 days
  • 2.All products sold and shipped from our company are genuine commercial accessories
  • 3.Each order comes with a Chinese printed "outbound list", which can be used as a unit accounting voucher and will be shipped together with the package
  • 4.If replacement is required, please keep the accessories clean and intact in packaging, along with the delivery note, and send them back. Our company promises to guarantee return and exchange within 15 days
  • 5.Special note: ordering accessories from the manufacturer is not covered by the warranty

Other Parts