Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
The 2WD and 4WD series of ZTE Golden Lion are matched with a 90KW Mitsubishi four cylinder electronic injection engine and a 127KW Daimler Chrysler six cylinder engine, respectively. The key components of the transmission, car, and suspension are directly imported from the United States and Japan. Especially the 4WD version of the time-sharing drive system allows drivers to choose the driving mode based on actual road conditions. When driving on general roads and highways, Economy (rear wheel drive) driving mode can be adopted, and four-wheel drive can be used when driving on harsh roads such as mountains, snow, and mud. Whether it is rough or smooth, the four-wheel drive version of the "ZTE Golden Lion" will help you move forward and create a four-wheel drive myth
Copyright © 2021.Company name All rights reserved.