The exterior decoration of the metal anti-collision crossbeam. The function of the rear bumper: 1. Safety protection function; 2. Relieve external impact forces; 3. The role of protecting pedestrians; 4. Decorative; 5. Improve the aerodynamic performance of the vehicle. The rear bumper is composed of an outer panel, cushioning material, and crossbeam, which have certain elasticity and good force absorption characteristics. It is a safety device that absorbs and mitigates external impact forces and protects the rear of the vehicle)
The method for replacing the rear bumper is as follows: 1. Remove the cover, clip, screw, and bolt of the rear bumper; 2. Pull the bumper in the wheel arch area; 3. Remove the bumper from the side and replace it with a bumper of the same model. The rear bumper is a crossbeam under the rear light
In terms of appearance, there is no obvious difference between the Tuyano EV and the fuel version Tuyano. The EV version still retains the air intake grille, with two iconic silver decorative strips in the middle. To distinguish whether this is a pure electric or fuel model on the front, you need to carefully look at the headlights of the car. There is a blue circle around the light group, which can be considered as the identity of the Tuyano EV. In terms of the cargo compartment, the floor of the Tuyano EV's cargo compartment is very flat, The length inside the car is 3.35 meters, width is 1.88 meters, and height is 1.67 meters. The maximum width when the car door is opened is 1.23 meters, and the platform is 65 centimeters above the ground. The Tuyano EV is equipped with a 79.92 kWh lithium manganese oxide battery from Mengguli, and the motor is a permanent magnet synchronous motor produced by Foton, with a peak power of 100 kW
Copyright © 2021.Company name All rights reserved.