The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
Jiangnan Elf (JNJ7III) is a fully redesigned and upgraded version of Jiangnan Automobile's original Alto chassis. It is positioned as a fashionable car for urban roads and is equipped with a 1.1-liter inline 4-cylinder 8-valve, four stroke water-cooled, multi-point sequential electronic fuel injection engine. The top speed is 120 kilometers per hour, and the output power is as high as 38.5 kW. The matched transmission is a 5-speed manual transmission, and the controllers coordinate the strain to make the handling sensitive and comfortable. The fuel consumption standard is 5L/100 kilometers, ensuring low fuel consumption while also providing high environmental protection
Copyright © 2021.Company name All rights reserved.